Sinma – M
- Indications for use:
- crowns manufacturing;
- coating of fixed dentures (pressed-soldered and whole-piece dentures);
Strong points:
- prolonged time of molding mass pot life in plastic state;
- high cosmetic properties due to layer-by-layer denture modeling using masses of different colors;
- color fastness;
- high degree of plasticity;
- optimal strength and elasticity characteristics;
Application instructions:
The modeling process is carried out directly on the denture framework
- this operation involves the use of whole-piece metal frameworks having retention points;
- degrease the framework with monomer (AKR-7 type) and prime it with varnish (EDA-03 type);
- select the proper color of enamel for the type of dentin that was chosen: enamel color №1 is used with dentins № 6, 10, 12, 14; enamel color № 2 is used with dentins № 16,19, 20, 24;
- powder-liquid ratio should be 2:1 respectively;
- powder-liquid ratio should be 2 : 1,5 in case a brush is used;
- carry out the process of polymerization in a dental polymerizer at 120°C and 4-5 atmospheres during 10 minutes;
Manufacture by packing plastic into flask
- whole-piece and pressed frameworks may be used to manufacture combined structures;
- degrease and prime the structure;
- use uncolored wax for teeth modeling operations;
- the powder-liquid ratio should be as specified above;
- polymerize plastic packed in a flask in water bath by bringing gradually to the boiling point within 30-40 minutes;
- polymerization process takes 45 minutes;
- the flask should cool down at room temperature;
- treat and polish dentures after they are cooled;
- the color numbers should conform to the uniform dental coloring pattern;
Complete set:
1. Sinma - M
Dentin powder:
color №6
color №10
color №12
color №14
color №16
color №19
color №20
color №24
20 g (vial)
40 g (vial)
40 g (vial)
40 g (vial)
40 g (vial)
40 g (vial)
20 g (vial)
20 g (vial)
Enamel powder:
color №1
color №2
20 g (vial)
20 g (vial)
Liquid 150 ml (vial) Dyes concentrates:
white (А)
yellow (B)
brown (C)
grey (D)
10 g (vial);
10 g (vial);
10 g (vial);
10 g (vial);
Application instruction 2. Sinma-M (single color):
Dentin powder (1color):
color №4
color №6
color №8
color №10
color №12
color №14
color №16
color №19
color №20
color №24
40 g (2 vials)
40 g (2 vials)
40 g (2 vials)
40 g (2 vials)
40 g (2 vials)
40 g (2 vials)
40 g (2 vials)
40 g (2 vials)
40 g (2 vials)
40 g (2 vials)
Liquid 40 ml (vial) Application instruction